Key Features:
- Pocket size analogue headphone amplifier
- Intuitive design and use
- Up to more than 20 hours of battery run-time
- Compatible with all portable music players
- Usable as pre-amp for active loudspeakers
- ‘Centre Adjust’, an innovative built-in balance adjustment without additional electronic parts
The Traveller sets a new standard in the realm of mobile headphone amplifiers. Lehmannaudio have designed it for a generation who is constantly on the move: no matter if at home, in the office or travelling internationally – this elegant companion will always give you a unique sound experience, while continuing to live up to the highest aesthetic demands.
Besides its practical size and ease of use, the Traveller's stand-out ability is in its outstanding sound quality. This is the result of Lehmannaudio's decades of experience in the audio sector and their infinite passion for music. First-class components and a sophisticated circuit design are self-evident as soon as you switch Traveller on.
The Traveller’s intuitive design requires only two push buttons. The volume control works electronically and is therefore utterly precise, even down to the lowest levels. This is due to a microprocessor-controlled passive resistor network which prevents sonic losses. The set volume levels is saved automatically when turning the unit off, and with a maximum battery run-time of more than 20 hours the music won’t stop playing even on the longest flights. By working in the analogue domain, Traveller is also guaranteed to work with all modern portable players.
The exceptionally transparent sound is provided by the discrete zero global feedback output stage. Headphones and players find contact via solid mini jack sockets from Lumberg. The voltage gain is effected by audiophile components from Analog Devices and Burr Brown.
This fully analogue headphone amplifier will drive even demanding headphones hands down and is so impressive that it could also double quite easily as a pre-amp for active loudspeakers. This is made possible by two pairs of parallel inputs and outputs plus another input and output socket on the the front and rear panel.
This device is also ideally suited for persons with hearing impairments: when needed, the so-called "Center Adjust" function of the Traveller optimises the imaging of the "acoustical centre". That way every music lover can level out unevenly recorded source signals or listening differences between the right and left ear.
An audiophile mini jack cable from Audictive and a charging cable are included in the box, the charging socket complies with the Micro USB standard.
Specifications:
- Input Impedance: 47kΩ
- Signal-to-Noise Ratio: >95dB RMS unw.
- Power: 12 mW (330Ω), 120 mW (33Ω)
- THD: 0.02% at 3 mW, 330 ohms
- Channel Separation: >80 dB, 10 kHz
- Tracking Error: <0.3dB
- Max Gain: 10dB
- Battery Capacity: LiPo 3.7 V, 4,000 mAh
- Battery Running Time: Up to 20 hours on a single charge (dependent on volume)
- Charge Time: Up to 6 Hours
- Dimensions: 80 x 90 x 25mm
- Weight: 196g
